Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Taylor, AL

Brick Cleaning in Taylor, AL

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar. Typical cost $250-$700.

The secret to brick cleaning is using the right method, not the most pressure. In Taylor, AL, we match the cleaner and pressure to the surface so it comes out clean without damage.

The right method for the job

Low-pressure wash and masonry cleanersCleaning method

Signs you need brick cleaning

  • Green or black growth on shaded brick
  • White powdery deposits (efflorescence)
  • Soot on chimneys
  • Mortar haze or paint drips

Where the grime comes from

  • Shade and moisture
  • Salts carried to the surface by water
  • Soot and smoke
  • Sprinkler water hitting the wall

Safe steps for homeowners

  • Brush off dry efflorescence with a stiff brush before wetting it
  • Fix gutters and downspouts that soak the brick
  • Look for cracked or missing mortar before washing

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Eroding mortar joints with high pressure
  • Driving water into old, soft brick
  • Using acid without pre-wetting, which can burn the brick

What happens on the day

  1. Inspect brick and mortar condition
  2. Pre-wet and protect nearby surfaces
  3. Apply the right masonry cleaner or soft wash
  4. Rinse at low pressure
  5. Check for remaining stains and treat as needed

Typical brick cleaning prices

$250-$700Typical range for a typical brick home front or chimney
2-4 hoursTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving Taylor, AL and nearby towns

Mildew and algae are the main reason Alabama homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of Alabama are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Spring pollen season in Alabama coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of Alabama. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

Besides Taylor (ZIP code 36305), we handle brick cleaning in Dothan (6.1 mi), Midland City (10.8 mi), Kinsey (11.8 mi) and Ashford (13.8 mi). Call (555) 010-0000 for a free quote in Taylor.

Brick Cleaning: frequently asked questions

How much does brick cleaning cost in Taylor, AL?

Brick Cleaning typically costs $250-$700 for a typical brick home front or chimney, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for brick cleaning?

Brick Cleaning is done with low-pressure wash and masonry cleaners. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is brick cleaning safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule brick cleaning?

Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Taylor, AL

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Gum Removal

Removing chewing gum from sidewalks, entrances and plazas with hot water and steam.

Typical $200-$1,000

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Exterior Mold & Mildew Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$700

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Soft Washing for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $300-$800

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Commercial Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$2,000

Roof Cleaning

Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes.

Typical $400-$1,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Taylor, AL. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote